In this article, let me show you how to setting up IIS on your Windows 10 OS. I am using Windows 10 Enterprise edition.

First, open the browser and just type the url http://localhost/ shown on the below picture:

When you pressing Enter, it will throw page not found error.
Now I am going to search for IIS manager. Not found!
Then, open Control Panel -> Click Programs.
Under Programs and Features, click Turn Windows features on or off.

The popup will appear as you can see on the following picture:

Just check the Internet Information Services and its related features.
Under Internet Information Services check the following folders:

• FTP Server
• Web Management Tools
• World wide web services
• Application development features
• Common HTTP Feature
• Health and Diagnostics
• Perfomance Feature
• Security

Then click OK to complete the installation of new features.
Click Restart now to apply changes to complete the IIS feature installation.

After restart, you will see the IIS webserver option on the All Programs menu. Now, open the browser then write on address bar http://localhost.

Internet Information Services (IIS) successfully configured!

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.

In this post, we're gonna explain how to use ASP.NET to configure custom error pages in IIS (Internet Information Server).  If we configure .NET Error Pages at the site level, ASP.NET stores the settings in the site’s web.config file. Since these settings are stored in the web.config file they are portable and can be easily moved to another server with the site’s content.

Step 1

Open Internet Information Services (IIS) Manager.  Select your website. Note: This could also be set at the server level and applied to all sites on the server. DoubleClick on the “.NET Error Pages” icon.

The .NET Error Pages features view will be displayed.

Step 2

Click the “Edit Feature Settings” link to enable this feature. The “Edit Error Page Settings” dialog box will appear.

In order to change the default mode, we must also specify a “Default Page”. This page will be used for all status codes that are  not otherwise defined. In this example, we are using a generic custom error page to trap all other errors. Once you enter the absolute URL for the default error page click OK.  It may be a good idea to use a static HTML page here just in case ASP.NET is not functioning properly.
By default server errors are shown when logged on locally to the IIS server and custom errors will only be used from remote sessions. You will want to change this to “On” if you are logged on locally to the IIS server. Otherwise, it will display detailed server errors, and not our custom error pages.

Step 3

Next we will explicitly define the 404 Error code. To get the browser to throw a 404 error, we pointed it to a file on the test site that does not exist. As you can see in the following image the friendly HTTP 404 error page was shown in IE9. A friendly HTTP 404 Error in IE9:

Step 4

On the .NET Error Pages Actions menu click the Add link.

Step 5

The “Add Custom Error Page” dialog will appear. This is where you define individual error pages per status code. For this example, you will add a custom page for the HTTP 404 Error.

Now that you have turned on the feature and added a custom page for the 404 status code, you can verify it is working. To verify visit a page that does not exist. In this example, you will use http://mysite.com/deletedfile.aspx. You can see in the following image that the custom error page was shown.

Step 6

As mentioned above this can also be managed from the site’s web.config file. Consider the following configuration section from our site’s web.config file.

<configuration>
  <system.web>
    <customErrors defaultRedirect=”http://mysite.com/errors/Error.aspx” mode=”RemoteOnly”>
       <error redirect=”http://mysite.com/errors/404.aspx” statusCode=”404″ />
    </customErrors>
  </system.web>
</configuration>

Everything you set in the GUI can easily be set directly in the web.config. This will also allow you to setup .NET Error Pages, if you are on a shared hosting Plan.

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.

IIS usually works well in Windows. but sometimes, we have a tendency to customize it to serve a required setting for a specific web project. If we install Xampp in Windows, default Xampp configuration forces IIS to decline its normal beaver or any custom configuration could be the cause.

So let’s see however we are able to reset IIS to its default settings. i'm working with Windows 8 and IIS 8.

Reset IIS

Go to 'Control Panel\Programs’.
Click 'Turn Windows feature on or off'.

Now, uncheck these two check boxes.
Click OK
And then, reboot/restart machine.

Again Go to 'Control Panel\Programs'.
Click 'Turn Windows feature on or off'.
Check these two check boxes.
Click ok.
Reboot/Restart machine.

Go to 'C:\Windows\System32\Drivers\etc'.
Open the 'hosts' file with Notepad.

Remove the Custom IP configurations, if any.
Save the edited hosts file ‘Ctrl+s’.

If Windows doesn’t let you save the 'hosts' file, copy the hosts file to another location.
Do edit and save.

Replace the 'hosts' file at 'C:\Windows\System32\Drivers\etc' with your edited 'hosts' file and we are ready to go.
"turn windows features on" An error has occurred. Not all of the features were successful.

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.

In this post, we're going to be very basic and straight forward few clicks on how to create an dconfigure self-signed certificate in IIS 7 or later.

Steps here mentioned are based on IIS 8, but it would be almost same on IIS 7 as well.

Step 1

To get started open IIS and select Server Certificates feature.

It will display list of all installed Server Certificate on web server.

Step 2

To create new self-signed certificate, click on Create Self-Signed Certificate in action pane.

It will open dialog box where you can specify friendly name for server certificate and certificate store for newly created SSL certificate.

Just specify name of the certificate, certificate store and click on OK. So, you are half way done, you have created Self-Signed Certificate with IIS, but still half way to go. After creating certificate, you need to bind it with websites then only we will be able to browse local IIS website with HTTPS.

Step 3

To bind websites with this certificate, select website in IIS and right click on it and select Edit Bindings.

It will open Site Bindings dialog where we can see binding information for selected websites. By default you will find one HTTP binding listed here.

Step 4

Click on Add button to Add new binding for selected website.

Step 5

Here, select binding type HTTPS and select newly created SSL certificate from drop down and click on OK. And congrats, you have added HTTPS binding to website which uses self-signed certificate in local IIS. To verify open and browse https://localhost.

Hope this quick post would be helpful!

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.

In this post, we will learn how you can use IIS URL Rewrite extensions to redirect domain.com to www.domain.com. IIS URL Rewrite extensions enables web administrator to enforce powerful rules to transform complex URLs into simple and consistent Web addresses. As well it also helps to produce user and search engine friendly URLs.

As you all know that by default, you can access website with or without WWW. For e.g. browsing hostforlife.eu and www.hsotforlife.eu will open same website. This means there are two different web addresses are available for one website and hence website’s SEO ranking will be distributed between these two addresses. To overcome these SEO ranking distribution, we can force all web traffic to redirect either domain.com or www.domain.com. Google web masters tool also allow web master to set preferred domain for indexing website URLs. So conclusion is that redirecting all web traffic to only one primary domain or canonical domain can improve SEO ranking. Just follow these steps with IIS.

Step 1

Connect to website through IIS manager and click on URL Rewrite icon.

Step 2

In Actions pane click on Add Rules.

Step 3

In Add Rules dialog box click you can find several predefined rule template. Click on canonical domain name template under search engine optimization section.

Step 4

It will open dialog box to select primary domain for website. Choose appropriate options.

Step 5

Press ok. You have done it. Now all your web traffic will be redirected to primary domain you have selected. And you can see added rewrite rule in list pane. But just using predefined rule template is not enough for web administrator. We should also dig into rule settings done by this rule template. For examine settings of created rule select rule in list pane and double click on it or click on Edit Rules link in Action Pane.

Step 6

It will open edit inbound rule window. Scroll down to bottom of window. There you will find Action sections. In action sections, there is one drop down named Action Type. Default value of Action Type is redirect. Expand Action Type drop down to see different actions available for this rule.

Step 7

And below action type drop down there is another drop down Redirect Type. Default value of this is Permanent (301). Expand drop down to see list of available other redirect type.

Setting redirection type Permanent (301) will cause to send HTTP 301 status code and then after it will redirect to primary domain. So search engine can index appropriate URLs.

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.