The process of installing an Active Directory domain in Windows Server 2008 is quite simple, but some beginners or IT professionals that have never had a chance to get their hands on AD installations and that are not familiar with its requirements might stumble across a few pitfalls.

For easier, let us help you to host your IIS 7.5 site. Only with € 3.00/month, you can get the reasonable price with best service. So, contact us in HostForLife.eu.
This topic contains only brief information about Windows Server 2008.

An NTFS Partition

To successfully install AD you must have at least one NTFS formatted partition. Back in older operating systems this was something that you actually had to tell people about, because *some* administrators had servers that did not have their partitions formatted with NTFS. Nowadays, NTFS is the only way to go in Windows-based servers, but I will nevertheless put it on the writing, just to make sure.

This partition is where the SYSVOL folder is placed, and usually, that is the C:' partition, but for large AD deployments, this could very well be a different partition.

To convert a partition (C:) to NTFS type the following command in the command prompt window:

convert c:/fs:ntfs

Free Space on Your Disk

You need at least 250mb of free space on the partition you plan to install AD on. Of course you'll need more than that if you plan to create more users, groups and various AD objects.

Local Administrator’s username and password

Remember, only a local Administrator (or equivalent) can install the first domain and thus create the new forest. Other installation scenarios – such as adding additional (replica) DCs require either Domain Admin permissions, or, in case of new domains in the same tree or in new trees – Enterprise Admins permissions.

IP Configuration

While it is possible to install Active Directory on a server that has a dynamically-assigned IP address, it doesn't make much sense to do so. It's much better to configure the server with a manual and dedicated IP address. If you do not use a dedicated IP address, DNS registrations may not work and Active Directory functionality may be lost. If the computer is a multi-homed computer, the network adapter that is not connected to the Internet can host the dedicated IP address.

The Active Directory domain controller should point to its own IP address in the DNS server list to prevent possible DNS connectivity issues.

To configure your IP configuration, use the following steps:

Note: IP addresses can be also configured from the Command Prompt by using the NETSH command, but I will not describe that procedure here.

1. Right-click Network, and then click Properties.
If you do not have the Network icon visible on your desktop, use Control Panel.

2. In the Control Panel'Network and Sharing Center window, click on the manage Network Connections link on the left.
Note: You can get to the same window by typing NCPA.cpl in the run command.

3. In the Control Panel'Network Connections window, right-click Local Area Connection, and then click Properties.

4. Click Internet Protocol version 4 (TCP/IPv4), and then click Properties.
Note: You can also configure the TCP/IPv6 properties, but you do NOT have to, and frankly, unless you require TCP/IPv6 functionality, I'd simply ignore it or disable it. More on that, in a future article.

5. Make sure you have a static and dedicated IP address. If you don't need Internet connectivity through this specific NIC you can use a Private IP range such as 192.168.101.0 with a Subnet Mask of 255.255.255.0.

6. The next step is not required, but I usually recommend checking that the correct configuration is in place. Click Advanced, and then click the DNS tab. The DNS information should be configured as follows:

Configure the DNS server addresses to point to the DNS server. This should be the computer's own IP address if it is the first server or if you are not going to configure a dedicated DNS server.

- If the Append these DNS suffixes (in order) option is selected for the resolution of unqualified names, the Active Directory DNS domain name should be listed first, at the top of the list.
- Verify that the information in the DNS Suffix for this connection box is the same as the Active Directory domain name.
- Make sure that the Register this connection's addresses in DNS check box is selected.

Active Network Connection Required During Installation

The installation of Active Directory requires an active network connection. When you attempt to use DCPROMO.exe to promote a Windows Server 2008 computer to a domain controller that doesn't have a connected and active NIC, you will receive the following error message:

The wizard has detected that none of the network adapters for this computer is assigned a valid IP address.

Verify that the network cable is connected and that a DCHP server is available or the computer is configured to use a static IP address, then click Next.


And after hitting Next, this error will appear:

Active Directory Domain Services Installation Wizard The TCP/IP networking protocol must be properly configured. Complete the configuration before you proceed.

To resolve this problem, plug the network cable into a hub or other network device. While highly improbable that the network connection status would be disconnected in a server that is about to be deployed in a production environment, this could be the case when building the server for testing purposes. If network connectivity is not available and this is the first domain controller in a new forest, you can finish DCPROMO.exe by installing Microsoft Loopback Adapter.

DNS Configuration

A DNS server that supports Active Directory DNS entries (SRV records) must be present for Active Directory to function properly. In my Windows 2000/2003 versions of the Active Directory installation tips I recommended to manually install and configure DNS prior to running DCPROMO. However, in Windows Server 2008, and when installing the FIRST Domain Controller in the Active Directory domain, I tend to recommend that you allow the DCPROMO wizard to automatically build the proper DNS services and configuration.

Clients Connections

When considering Internet connectivity, it is recommended (and in most cases, this is the proper and most-used configuration) that the client computers connect to the Internet through a NAT device (i.e. a Router that translates private IP addresses to one public one, and allows connectivity through one ISP-assigned IP address). This prevents any issues that may arise if clients obtain an IP address from your Internet service provider (ISP). In Small Office or Home Office (SOHO) scenarios, this can be achieved by using a second network adapter on the server connected to a hub. You can use NAT and Routing on the server to isolate the clients on the local network. The clients should point to the domain's INTERNAL DNS server, and NOT to the ISP's DNS server, to ensure proper DNS connectivity. The internal DNS server's forwarder will then allow the clients to access DNS addresses on the Internet.


Do not use Single-Label Domain Names

As a general rule, Microsoft recommends that you register DNS domain names for internal and external namespaces with Internet authorities. This is true for Windows 2000/2003 and for Windows Server 2008. This includes the DNS names of Active Directory domains, unless such names are sub-domains of names that are registered by your organization name, for example, "corp.example.com" is a sub-domain of "example.com". When you register DNS names with Internet authorities, it prevents possible name collisions should registration for the same DNS domain be requested by another organization, or if your organization merges, acquires or is acquired by another organization that uses the same DNS names.

DNS names that don't include a period ("dot", ".") are said to be single-label (for example, com, net, org, bank, companyname) and cannot be registered on the Internet with most Internet authorities.

Top Reasons to host your ISS 7.5 Website with HostForLife.eu

There are many reasons why so many people choose HostForLife over any other web hosting provider each year. Whether you’re beginner or an experience webmaster, HostForLife offers the perfect solution for everyone.

You’ll have highly trained, skilled professional technical support people ready, willing, and wanting to help you 24 hours a day. Your web hosting account servers are monitored from three monitoring points, with two alert points, every minute, 24 hours a day, 7 days a week, 365 days a year. The followings are the list of other added-benefits you can find when hosting with us:

1. World-class 24x7 Customer Support
Will your hosting company promptly answer questions and resolve issues - at 3 am on a Sunday? Even some providers claiming “24x7” support will not - but HostForLife will. Our outstanding uptime is backed by true 24x7 customer support. An expertly trained technician will respond to your query within one hour, round the clock. You will also get qualified answers. Other hosting companies typically have very low - level support staff during the night or weekends. HostForLife always has knowledgeable, top - level  support standing by, day or night, to give you the answers you need.

2. Commitment to Outstanding Reliability
Reliability, Stability, and Performance of our servers remain out TOP priority. Even our basic service plans are equipped with standard service level agreements for 99.99% uptime. Advanced options raise the bar to 99.99%. Our state-of-the-art data centers combine servers and SAN storage with full redundancy and operational tools with proprietary service management techniques. Full backup and recovery capabilities are implemented, including redundant power supplies, cooling and connectionsto major data networks.

3. “Right-size” plans for maximum value
HostForLife offers a complete menu of services. IT professionals select only what they need - and leave behind what they don’t. The result is an optimal blend of cost and performance. We offer IT professionals more advanced features and the latest technology - ahead of other hosting companies.

4. Profitable, Stable, Debt-free Business
Financial stability is the bedrock of a hosting provider’s ability to deliver outstanding uptime, cost-effective service plans and world-class 24x7 support.  HostForLife’s customers are assured of our financial integrity and stability - a stark contrast to the ups and downs they may have experienced with other providers.

5. The Best Account Management Tools
HostForLife revolutionized hosting with Plesk Control Panel, a Web-based interfaces that provides customers with 24x7 access to their server and site configuration tools. Some other hosting providers manually execute configuration requests, which can take days. Plesk completes requests in second. It is included free with each hosting account. Renowned for its comprehensive functionally - beyond other hosting control panels - and ease of use, Plesk Control Panel is available only to HostForLife’s customers.

6. 30-Day Money Back Guarantee
HostForLife 30 day money back guarantee ensures you have the ability to cancel your account anytime within your first 30 days under our full 30 day money back guarantee (less one-time account setup free). So what are you waiting for? Sign up today, risk free…

7. Simplicity with FREE 1-Click Installation
HostForLife was designed with ease of use in mind. From one click installations of your favourite website applications to our much talked about drag and drop website builder, you can rest assure your stay with us is going to be a smooth one. HostForLife offers the most extensive set of scripts on the web allowing you to build complicated websites with little or no programming knowledge at all. From blogs to forums to powerful e-commerce solutions, Super Green has something that is right for you.