IIS 7.5 and IIS 8.0 European Hosting

BLOG about IIS 7.5 Hosting, IIS 8.0 Hosting and Its Technology - Dedicated to European Windows Hosting Customer

IIS 8.0 Hosting France - HostForLIFE.eu :: How to Exploit the URL Rewrite Module for IIS to Handle Redirects to HTTPS?

clock February 14, 2019 10:23 by author Peter

We saw as problems URL Canonicalization can be solved in a declarative means a component of IIS, called URL Rewrite Module, which can be configured by specifying the appropriate rules of web.config. Another typical requirement in the management of a website is to make sure that applications that involve sensitive data (such as a page for payment by credit card) are carried out using the HTTPS protocol. How can we manage, however, requests that are received incorrectly using HTTP? A first solution may be to set the flag RequireSSL IIS for the particular folder that we want to protect (or maybe of all the site), as shown below:

The effect of this setting is that if a user visits the page via HTTP, IIS will raise 403.4 HTTP status code (Forbidden), displaying the standard error (or a custom version, if specified):

An alternative certainly more pleasant for the user is that instead of automatically redirected to the HTTPS address and, for this purpose, we can exploit once again the URL Redirect Module, by setting a rule similar to the following:

<rule name="ToHttps" stopProcessing="true">
  <match url="(.*)" />
  <conditions>
    <add input="{URL}" pattern="(secure/.*)" />
    <add input="{HTTPS}" pattern="ON" negate="true" />
  </conditions>
  <action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>

It applies to all addresses in input:

  • Pointing to a folder called secure
  • They are not using HTTPS

Hopefully we can eliminate the first condition, if we want the rule applies to the entire website and not to a particular folder. The final effect, specified in the node Action, is to perform a Redirect to the same page, but with the correct protocol.

Sometimes you may also need the opposite, ie postponing from HTTPS to HTTP. A typical example is when the SSL certificate covers only a subdomain of our site (for example secure.miosito.com) and therefore we want all the other pages are open in HTTP. In this case the rule to be created is very similar to the previous one:

<rule name="ToHttp" stopProcessing="true">
  <match url="(.*)" />
  <conditions>
    <add input="{URL}" pattern="(secure/.*)" negate="true" />
    <add input="{HTTPS}" pattern="ON" />
  </conditions>
  <action type="Redirect" url="http://{HTTP_HOST}/{R:1}" />
</rule>

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.



European IIS 10 Hosting - HostForLIFE.eu :: Set Default Page For A Website In IIS

clock January 18, 2019 10:07 by author Peter

In a few Web sites, if we type the Web site name, (like www.someurl.com) it will automatically load the page www.someurl.com/index.aspx. This is because of the setting of the “Default Document” feature of IIS. In this post we are going to discuss this feature of IIS.

  1. Open IIS, type the command “inetmgr” in Run window.
  2. Select “Default Document” and click.
  3. In the feature view, we can see some type of Document orderly kept.
  4. The top most had the highest priority and the last one had the least priority.

As per the above figure, the document “Default.htm” had the highest priority and the file “Default.aspx” had the lowest priority. This means whenever the user types a url (like www.someurl.com), then IIS looks for any one of the files that exist in the above order on that Virtual Directory. If it finds any one of the files, it will load that page.

IIS also allows, adds/removes the custom default document per Web site. For example, if we specify a page (say home.htm) as the default document which does not exist in the website, then IIS will look into that website and alert the user as shown below, which explicitly states that each time we type the url, IIS will look in that order.


As per the alert, it is advisable to move the default document at the top level, which will increase the performance in the sense IIS can avoid going further down in the list.

 



IIS 8.0 with Free ASP.NET Hosting - HostForLIFE.eu :: Generating SSL Certificate Request (CSR) with Certreq

clock January 11, 2019 11:01 by author Peter

Today, I will show you how to generate SSL certificate request (CSR) with Certreq. Certreq.exe is a command-line utility included on Windows Servers. It allows you to quickly generate a certificate request without having to use Windows's laborious GUI.

Step 1: Creating a config file

Open a text editor and paste the text below in the file:

;--- request.inf ---

[Version]
Signature="$Windows NT$"

[NewRequest]
; Replace Country with the 2-letter ISO code for your country
; Replace State with your state or province, without abbreviation
; Replace City with your city
; Replace Organization with your company
; Replace Organization_Unit with your department, or remove OU=Organizational_Unit entirely
; Replace www.example.com with the hostname you're requesting a certificate for
; For a wildcard SSL certificate, this would be *.example.com
Subject = "CN=www.example.com, OU=Organizational_Unit, O=Organization, L=City, S=State, C=Country"
; Key Exchange - for encryption
KeySpec = 1 
; 2048 bits minimum, 3072 or 4096 are valid too
KeyLength = 2048
; Needed if you need to export the certificate to another server
Exportable = TRUE
; Indicates a server certificate, not a user certificate
MachineKeySet = TRUE
SMIME = False
UserProtected = FALSE
; Generate a new private key
UseExistingKeySet = FALSE
; RSA key
ProviderName = "Microsoft RSA SChannel Cryptographic Provider"

ProviderType = 12
; Standard of CSR's
RequestType = PKCS10
; Digital signatures and encryption
KeyUsage = 0xa0

[EnhancedKeyUsageExtension]
; Server authentication
OID=1.3.6.1.5.5.7.3.1

;------------------------------

Step 2: Generate a Certificate Request

Generate your CSR with the following command:

C:\>certreq -new request.inf request.csr

Open the .csr file, and copy its contents in Kinamo's CSR application form, including the BEGIN CERTIFICATE REQUEST and END CERTIFICATE REQUEST lines.

Step 3: Install an SSL certificate with Certreq

The .cer file you receive from the Certificate Authority can easily be installed by saving the file on the server you generated the CSR on, for instance as cert.cer, and by executing the following command at the prompt:

C:\>certreq -accept cert.cer

IIS 8.0 with Free ASP.NET Hosting
Try our IIS 8.0 with Free ASP.NET Hosting today and your account will be setup soon! You can also take advantage of our Windows & ASP.NET Hosting support with Unlimited Domain, Unlimited Bandwidth, Unlimited Disk Space, etc. You will not be charged a cent for trying our service for the next 3 days. Once your trial period is complete, you decide whether you'd like to continue.



European IIS 8 Hosting - Germany :: How to Enable URL Redirection from Non-WWW to WWW?

clock December 20, 2018 10:44 by author Peter

We have many clients ask about how to redirect non-www to www URLs. We believe this is important factor in SEO as search engines consider http://www.domain.com and http://domain.com are different websites. As a result, if your website has been linked to from other websites using a mix of the two URLs you are effectively splitting the potential benefit of valuable link popularity.

Workaround

Using a 301 redirect on the “non-www” version of the URL, which is essentially a “permanent” redirect in server talk, you can effectively consolidate all of your link popularity to a single URL. This consolidation will serve to increase your website’s chances of obtaining and maintaining top rankings.

How To Enable The 301 Redirect

You need to instruct the server you are hosting your website on to redirect the traffic seamlessly. To do this you need to first establish what type of server your website is hosted on. There are two main types of servers that are in use: Microsoft and Apache (Linux/Unix), but as on our hosting environment, we use IIS, so we will discuss how to enable it on IIS.

Enable non-www 301 Redirect in IIS Server

Microsoft servers do not have a .htaccess file to alter so we suggest that you contact your hosting provider and request they make this change for you. If they are baffled or need further instructions on how to make the changes you can refer them to the tutorials referenced below:

1. Using Internet Services Manager create a new IP-based website using the http://yourdomain.com URL or alternatively you can avoid using a unique IP by using the host header (virtual website) of www.yourdomain.com.

2. Now verify the server headers for each website using the Server Header Checker. The server response should be 200 OK for both addresses.

3. Now add your domain-revised version of the following ASP code to the default home page for http://yourdomain.com:

< %@ Language=VBScript %>
< %
Response.Status=”301 Moved Permanently”
Response.AddHeader “Location”, http://www.yourdomain.com
%>


Note: do not change the spacing or line placement within the above code; place it as is.

4. Once the default page is online first visit your website via http://yourdomain.com to ensure the redirect is working. Next check the server headers for http://yourdomain.com and make sure you see the following code within #1: “HTTP Status Code: HTTP/1.1 301 Moved Permanently”. That code will confirm the 301 redirect is being properly communicated



IIS 8 Hosting - HostForLIFE.eu :: How to Config ASP.NET and IIS Request Length?

clock April 8, 2016 20:30 by author Anthony

In this post, i will show you how to configuring ASP.NET and IIS request length for post data. One of the most infuriating things about IIS configuration in general is how the Request length is configured in IIS and ASP.NET. There are several places that control how much content you can send to the server and over the years this setting has changed in a number of ways. The places where it's configured is not super obvious and they can be fluid because some of these features are optionally installed IIS features.

So here are the two main places where the request length is set in IIS and ASP.NET:

  • IIS Request Filtering
  • HttpRuntime maxRequestLength

Let's start with the IIS level setting, which is also a relatively new setting. It's based around the Request Filtering module in IIS which is an optional IIS component, but that is a required component if you have ASP.NET installed on your server (at least in the latest versions). If you have ASP.NET enabled in IIS the Request Filtering module is also enabled and the following settings apply.

If you don't use ASP.NET you can still install Request Filtering, but it's an optional component. So if you only use ISAPI or CGI scripts and no ASP.NET content Request Filtering may not be enabled in which case the following settings cannot be set and aren't required. Since most people do run ASP.NET at least for some sites, for all intents and purposes we can assume that the Request Filtering module is installed on IIS.

So to configure the posted content size you can use the following web.config based configuration settings:

<?xml version="1.0" encoding="UTF-8"?>
<configuration>
    <system.webServer>
     <security>
      <requestFiltering>
        <requestLimits maxAllowedContentLength="500000000"  />
      </requestFiltering>
    </security> 
   </system.webServer>
</configuration>

The maxAllowedContentLength determines the size of the POST buffer allowed in bytes. Above I've set the value to 500megs.

Or you can do the same thing in the IIS Management console using Request Filtering option in the IIS options:

As is usually the case you can apply the filtering at all levels of the IIS hierarchy – Machine, Site and Virtual/Application. Using web.config as shown above sets the settings at the Application level.

Because these are IIS settings, the value controls the IIS upload settings so they are applied against any and all requests that are fired against IIS, including ASP.NET, ASP, ISAPI extensions, CGI/FASTCGI executables, IISNodeJs requests and so on.

ASP.NET traditionally has had its own httpRuntime element in the <system.web> section that control ASP.NET runtime settings one of which is the maxRequestLength. This setting controls the ASP.NET pipeline's acceptance of file uploads and it needs to be configured in addition to the Request Filtering settings described above.

<?xml version="1.0" encoding="UTF-8"?>
<configuration>
  <system.web>
    <httpRuntime maxRequestLength="500000000" executionTimeout="120" />
  </system.web>
</configuration>

You can also use the IIS Management Console and the Configuration Manager option, to view all of the options on the httpRuntime element:

What's interesting is that the settings you see here widely mirror the settings in the Request Filtering section, and they are not inherited. It's your responsibility to make sure the settings are set correctly in both places. I recommend that you take a minute and go through the values you care about and set them correctly in both places.

The above describes ASP.NET settings. If you're using another framework, like WCF you may end up with yet another different set of settings on the WCF bindings and Endpoints. Just be aware of the framework you're using and that it too might have specific filters to restrict request size.



HostForLIFE.eu IIS 8 Hosting

HostForLIFE.eu revolutionized hosting with Plesk Control Panel, a Web-based interface that provides customers with 24x7 access to their server and site configuration tools. Plesk completes requests in seconds. It is included free with each hosting account. Renowned for its comprehensive functionality - beyond other hosting control panels - and ease of use, Plesk Control Panel is available only to HostForLIFE's customers. They offer a highly redundant, carrier-class architecture, designed around the needs of shared hosting customers.



European IIS 8 Hosting - UK :: Tips to Secure Your IIS Installation

clock November 18, 2015 20:55 by author Scott

You have just finished installing IIS on your Windows OS. You’re probably thinking that you can delve into the web development world and forget all about the underlying web server. After all, IIS is a Microsoft product so it should install with the right default configuration settings, right? That is far from true with IIS.

In this article, I will provide 8 tips that you can use to secure your IIS installation.

Move the Inetpub folder to a different drive

The Inetpub folder is the default location for your web content, IIS logs and so on. By default IIS 7 and upwards install the Inetpub folder in the system drive. It’s good practice to move the Inetpub folder to a different partition so that the web content is separate from the operating system. This folder can be moved after IIS installation is completed.

Install the appropriate IIS modules

IIS includes more than 30 modules  – you should only install the ones which are needed by your web applications. Disable any modules that are not required, to minimize the capacity of potential attacks. Periodically review the modules that are installed and enabled and remove any that are no longer required. You can use IIS Manager to list all the modules that are enabled.

  • Open IIS Manager
  • Select the name of the machine to view the modules for the whole machine, or change to the specific web site to view the modules enabled for the selected site
  • Double click on ‘Modules’
  • To disable a module, click on the module from the list and select ‘Remove’ from the Actions pane
  • Confirm the removal by pressing Yes

Disable the OPTIONS method

The OPTIONS method provides a list of methods that are supported by the web server. Although this might seem beneficial, it also provides useful information to an attacker. This will provide information to an attacker at the reconnaissance stage of this attack. Therefore it’s recommended to disable the OPTIONS method completely. This can be done by denying the OPTIONS verb from the HTTP Verb request filtering rules in IIS.

  • Open IIS Manager
  • Select the name of the machine to configure this globally (or change to the specific web site for which you need to configure this)
  • Double click on ‘Request Filtering’
  • Change to the HTTP Verbs tab
  • From the Actions pane, select ‘Deny Verb’
  • Insert ‘OPTIONS’ in the Verb, and press OK to save changes

Enable Dynamic IP Restrictions

The Dynamic IP Restrictions module helps blocks access to IP addresses that exceed a specified number of requests and thus helps prevent Denial of Service (DoS) attacks. This module will inspect the IP address of each request sent to the web server and will filter these requests in order to temporarily deny IP addresses that follow a particular attack pattern. The Dynamic IP Restrictions module can be configured to block IP addresses after a number of concurrent requests or by blocking IP addresses that perform a number of requests over a period of time. Depending on your IIS version you will need to enable either the ‘IP Security’ feature or the “IP and Domain Restrictions”  as explained in this Microsoft article.

This will include the ‘IP Address and Domain Restrictions module in the IIS Manager, from where dynamic IP restrictions can be set.

  • Open IIS Manager
  • Select the name of the machine to configure this globally (or change to the specific web site for which you need to configure this)
  • Double click on ‘IP Address and Domain Restrictions’
  • From the Actions pane, select ‘Edit Dynamic Restriction Settings’
  • Modify and set the dynamic IP restriction settings as needed and press OK to save changes

Enable and Configure Request Filtering Rules

It is also a good idea to restrict the types of HTTP requests that are processed by IIS. Setting up exclusions and rules can prevent potentially harmful requests from passing through to the server, since IIS can block these requests on the basis of the request filtering rules defined. For example, a rule can be set to filter traffic for SQL Injection attempts. Whilst SQL Injection vulnerabilities should be fixed at source, filtering for SQL Injection attacks is a useful mitigation. This can be set from the Rules tab found in the Request Filtering page in IIS Manager.

  • Open IIS Manager
  • Select the name of the machine to configure this globally (or change to the specific web site for which you need to configure this)
  • Double click on ‘Request Filtering’
  • Change to the Rules tab
  • From the Actions pane, select ‘Add Filtering Rule’Set the required rules, and press OK to save changes

The rule set in the below screenshot would instruct IIS to check for the provided strings in requests for .asp and .aspx pages. IIS will then block the request if any of these strings are found.

You can also filter requests that contain things like high-bit characters or double escape characters. This and other similar filtering options are explained at http://technet.microsoft.com/en-us/library/hh831621.aspx

Enable logging

Configuring IIS logging will cause IIS to log various information from HTTP requests received by the server. This will come in handy and can give a better understanding of issues that might have occurred on your website when things go wrong. It’s the place where you will start the troubleshooting process in such situations.

The server’s logs can also be continuously or periodically monitored in order to review the server’s performance and provide optimizations if needed. This can be automated using various server monitoring tools. Make sure to keep a backup of the logs. Microsoft also provide Log Parser, which is a tool that can be used to query and retrieve specific data from IIS logs. Additionally, log consolidation tools prove useful for consolidating and archiving data from logs in a more meaningful way.

IIS logging can be enabled and configured from IIS Manager > select the machine name or the specific site you want to configure > Logging. Since these log files might grow quite large, it would be a good idea to start a new file periodically.

Use the Security Configuration Wizard (SCW) and the Security Compliance Manager (SCM)

Both of these Microsoft tools can be used to test your IIS security. The Security Configuration Wizard (SCW) runs different checks and provides advice and recommendations on how to boost your server’s security. The Security Compliance Manager (SCM) tool performs security tests on your server and compares server configurations to predefined templates as per industry best practices and security guide recommendations.

Updates

Finally, ensure that you keep up to date with the latest updates and security patches. It is interesting how often this basic security requirement is missed. The majority of hacks affecting the web server occur on unpatched servers. This just demonstrates how important it is to always keep your IIS web server up to date.

 



IIS 8.0 Hosting Germany - HostForLIFE.eu :: How To Access A Folder With No Default Document

clock October 31, 2015 01:02 by author Rebecca

In this post, I will tell you how to access a folder with no document in IIS. It's easy, just follow these steps:

Step 1

Create a folder called Original--IIS-Files

Step 2

Move all the files into folder Original-IIS-Files

Step 3

Navigate to your web server. By default, the Web Server will render the following message when the folder has no default documents.

And you're done! Simple, right?

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.

 



IIS 8.0 Hosting France - HostForLIFE.eu :: How to Configure DNS Record for Sub Domain

clock October 16, 2015 11:34 by author Rebecca

In this article, I will tell you how to configure DNS record for sub domain.

Step 1

Open your domain control panel then go to DNS manager.

Step 2

Add following A records for domain.com and www.domain.com which point to IIS server IP address:

domain.com  IN A XXX.XXX.XXX.XXX
www.domain.com  IN A XXX.XXX.XXX.XXX
service.domain.com IN A XXX.XXX.XXX.XXX

First two rows will ensure that whenever user browse domain.com or www.domain.com at that time it will be routed to IIS server and rest will be take care by IIS then it will serve public site. The third row in above is important for next step.

Step 3

Now add following wildcard CNAME record:

*.domain.com  IN CNAME service.domain.com

In above wildcard entry ensure that any sub domain request for domain.com will be routed to server which is pointed by service.domain.com.

In IIS setup, you have to edit website binding to include domain.com and www.domain.com as host header, by this way you can tell IIS that any request from domain.com and www.domain.com will be handled by this particular website. So, whenever user browse domain.com or www.domain.com it is serving public website without any problem.

While in case of sub domain it is showing error that “The connection was reset” this is because IIS does not found host header entry for requested domain in any websites. So, you need to add host header entry in service.domain.com website created in IIS setup because service.domain.com is actual website which is going to serve hosted service application when it is browse from sub domain. Use the following code to add host header entry programmatically in IIS:

private string GetWebSiteId(string serverName, string websiteName)

{

    string result = "-1";

 

    DirectoryEntry w3svc = new DirectoryEntry(string.Format("IIS://{0}/w3svc", serverName));

 

    foreach (DirectoryEntry site in w3svc.Children)

    {

        if (site.Properties["ServerComment"] != null)

        {

            if (site.Properties["ServerComment"].Value != null)

            {

                if (string.Compare(site.Properties["ServerComment"].Value.ToString(),

                                        websiteName, true) == 0)

                {

                    result = site.Name;

                    break;

                }

            }

        }

    }

 

    return result;

}

       

private void AddHostHeader(string hostHeader, string websiteID)

{

    DirectoryEntry site = new DirectoryEntry("IIS://localhost/w3svc/" + websiteID);

    PropertyValueCollection serverBindings = site.Properties["ServerBindings"];

 

    serverBindings.Add(hostHeader);

 

    Object[] newList = new Object[serverBindings.Count];

    serverBindings.CopyTo(newList, 0);

 

    site.Properties["ServerBindings"].Value = newList;

    site.CommitChanges();

}  

 

AddHostHeader("127.0.0.1:80:user1.domain.com", GetWebSiteId("localhost", "service.domain.com"));

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.



IIS 8.0 Hosting Ukraine - HostForLIFE.eu :: How to Configure ASP.NET Application on IIS

clock October 13, 2015 12:46 by author Rebecca

In this article, I'm going to explain how to set Windows Authentication to configure ASP.NET application in IIS. To make Windows authorize application you need to make changes in web.config as well as IIS manager.

Configuring Windows Authentication

<system.web>
   <authentication mode="Windows"/>
</system.web>

  1.     Start Internet Information Services (IIS).
  2.     Right-click your application’s virtual directory, and then click Properties.
  3.     Click the Directory Security tab.
  4.     Under Anonymous access and authentication control, click Edit.
  5.     Make sure the Anonymous access check box is not selected and that Integrated Windows authentication is the only selected check box.

If you will put Anonymous check box checked then it will not take windows login Id for the user. e.g. string windowsLogin = Page.User.Identity.Name;

Now, your application will work on windows authentication.

Here is the example code:

protected void Page_Load(object sender, EventArgs e)
{
   try
     {
       //Start:
        if (Session["EmployeeCode"] == null)
          {
             string windowsLogin = Page.User.Identity.Name;
             //Check user is valid or not from data base
            //I am putting simple condition by hard code value
            if (windowsLogin=='ValidUser')
                 {
                   Session["EmployeeCode"] = userId;
                 }
             else
                {
                  Session.Abandon();
                  Response.Redirect("InvalidUser.aspx", false);
                }
         //End
     }
    catch (Exception ex)
    {
       //Handel exception here
       Throw;
     }
}

It's done! You will get user from windows credential and check with existing user with database. If user is valid go ahead other wise navigate the user to Invalid page.

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.



IIS 8.0 Hosting - HostForLIFE.eu :: How to Setting Up IIS On Your Windows 10 OS ?

clock September 23, 2015 21:28 by author Peter

In this article, let me show you how to setting up IIS on your Windows 10 OS. I am using Windows 10 Enterprise edition.

First, open the browser and just type the url http://localhost/ shown on the below picture:

When you pressing Enter, it will throw page not found error.
Now I am going to search for IIS manager. Not found!
Then, open Control Panel -> Click Programs.
Under Programs and Features, click Turn Windows features on or off.

The popup will appear as you can see on the following picture:

Just check the Internet Information Services and its related features.
Under Internet Information Services check the following folders:

  • FTP Server
  • Web Management Tools
  • World wide web services
  • Application development features
  • Common HTTP Feature
  • Health and Diagnostics
  • Perfomance Feature
  • Security

Then click OK to complete the installation of new features.
Click Restart now to apply changes to complete the IIS feature installation.

After restart, you will see the IIS webserver option on the All Programs menu. Now, open the browser then write on address bar http://localhost.

Internet Information Services (IIS) successfully configured!

HostForLIFE.eu IIS 8.0 Hosting
HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes. We have customers from around the globe, spread across every continent. We serve the hosting needs of the business and professional, government and nonprofit, entertainment and personal use market segments.



About HostForLIFE.eu

HostForLIFE.eu is European Windows Hosting Provider which focuses on Windows Platform only. We deliver on-demand hosting solutions including Shared hosting, Reseller Hosting, Cloud Hosting, Dedicated Servers, and IT as a Service for companies of all sizes.

We have offered the latest Windows 2016 Hosting, ASP.NET Core 2.2.1 Hosting, ASP.NET MVC 6 Hosting and SQL 2017 Hosting.


Tag cloud

Sign in